Only US $140.00 Duet 2 Wifi V1.04 Board Cloned Duet2 Wifi 32-Bit Control Board With 5" 7" Panel Due Touch Screen fo

Duet 2 Wifi V1.04 Board Cloned Duet2 Wifi 32-Bit Control Board With 5" 7" Panel Due Touch Screen fo

[4000058500247] Name:Duet 2 Wifi V1.04 Borad Cloned Description: - The DuetWifi is an advanced 32 bit electronics for the control of 3D printers and other CNC machines. - Powerful 32 Bit Processor; Dedicated Wifi module; Super quiet TMC2660 stepper drivers, up to 256 microstepping. - Highspeed SD card and support for a second SD external card if required;Dual extruders on the main board, up to 5 more extruders on theexpansion board. - High Power rating: Each stepper driver is capable of2.8A motor current, currently limited in software to 2.4A. The bedheater channel is specifically designed for high current (18A). - Connectvia PC, tablet or smartphone on the same network to the on board webinterface; Setup your printer and update the firmware through the webinterface. Specification: - All common 3D printer geometries are supported - Expandable up to 7 extruders with Firmware support for mixing nozzles and remapping to use high power external drivers. - Support for the PanelDue: a full colour graphic touch screen - Provided plugs and crimps as well as ferrules for power and heater terminals. - The PanelDue is a colour touch screen controller for the Duet and other 3dprinting electronics that support it. - The control board and firmware support 3 screen sizes: 4.3", 5" and 7", at two resolutions: 480×272 (4.3-inch displays) or 800×480 pixels (5- and 7-inch displays). Note that the lower resolution of the 4.3" display means that it cannot display as much information on the screen - for example a maximum of 4 extruders. Firmware： ·Using a modified version of open source RepRapFirmware. ·Firmware office web: https://github.com/dc42/RepRapFirmware.